If not: You can purchase new brushes through our online store or by calling 1-80Ī. Securing your trap to a pallet or other stable surface will help null the effects of the throwĪ. If so: Reference the limit switch adjustment in Trouble Shooting Section.Ī. If not: reference plunger assembly or slide tray solution in Trouble Shooting Section.Ģ) Is there a gap between the clay bird and the rubber strip?Ī. If your trap thrower is breaking birds upon launching, there are a few possible areas of concern we will have you check, before we can properly diagnose your issue:ġ) Are the birds dropping flat onto the arm?Ī. If performed correctly, this action should solve your issues with the slide tray on your auto trap. If you want the slide plate to open more and more tension to be put on the clay, push the cam counter-clockwise so the head of the bolt moves to the left side of the slot. Once you locate the Phillips head screw, loosen it. In the cam there is a slotted adjustment so that you can adjust how much the tray opens up and how much pressure the plunger cap puts on theĬlay. To adjust this you will need to locate the Phillips head screw that runs down through this cam. The cam on the Auto Trap is just above the arm and it is a flat piece of metal shaped like a kidney. If the area of interference is greater than directed above, you have the option to adjust the entire mechanism. This method is best used is the area of interference is small (around 1/8th of an inch). If the area of interference is minor you can simply file down the spot that the birds get hung up on. Both solutions require you to first turn the trap thrower to disarm and remove the primary spring. There are a few things you can do to correct for the clay bird hang-up issue, you are experiencing.
0 kommentar(er)
